Flue gas thermostat
- On/off switch based on flue gas temperature.
- Switch temperature between 20°C and 240°C.
The series CTF150 is typically used for on/off control of circulation pumps and load units. The flue gas thermostat consists of a temperature probe connected to the switch unit. The switch is used to control the electrical supply to a circulation pump or a load unit with an integrated circulation pump.
The series CTF150 can also be used in heat generator plants with multiple heat generators to change over from solid fuel to oil- or gas boilers.
The temperature probe can be mounted on the outside of the flue gas pipe, or inside the pipe using the immersion pocket series CTF851. The switch unit is prepared for easy wall mounting.
|Art.no.||Reference||Switch temp. range [°C]||max. temperature probe [°C]||A [mm]||B [mm]||C [mm]||Weight [kg]|
|56020100||CTF151||20 - 240||500||53||120||70||0,2|
|Installation instruction CTF150|
|Enclosure rating:||IP54 (EN 60529)|
|Hysteresis:||7% of the scale range|
|Contact rating:||N/C contact: max. 16(2,5)A 230 VAC;
N/O contact: max. 6,3(2,5)A 230 VAC;
min. 24V AC/DC, 100mA
|Temperature probe:||Ø6 mm x 96 mm|
|Temperature probe line:||Ø1,5 mm x 1500 mm|
|Immersion pocket:||Ø8 mm x 0,75 mm, length 100 mm|
|Storage temperature:||-30°C to +50°C|
|Usage temperature:||0°C to +50°C|
|Material, Case lid:||Plastic ABS|
|Material, Housing:||Plastic PA (inforced)|
|Material, Immersion pocket:||Stainless steel (CrNi, 1.4571)|
|Material, Temperature probe:||Stainless steel (CrNi, 1.4301)|
|Material, Temperature probe insulation:||Plastic PVC hose|
|56020200||CTF851||ESBE CTF851 Immersion pocket|