We believe in offering our installers expert support. No matter if it’s the first time you try one of our products, or if you run into extremely challenging situations.
ESBE series CRA110* & CRA120 is a constant flow temperature controller.
ESBE series CRA140* is a combined constant flow temperature and return temperature controller.
ESBE series CRA150* is a constant flow temperature controller for combined heating and cooling applications.
ESBE series CRB100* & CUA100 is a room temperature based controller complete with room unit.
ESBE series CRC110* & CRC120 is an outdoor temperature based controller.
ESBE series CRC140* is a combined outdoor temperature and return temperature based controller.
ESBE series CRD100* is a combined outdoor temperature and room temperature based controller.
ESBE series CRS100* is a fast responsive constant flow temperature controller especially developed for domestic hot water applications.
ESBE series 90C* is an outdoor temperature based controller with optional room temperature sensor for combined outdoor/indoor based control. The controller has an integrated actuator with a torque of 15Nm.
* The controller is complete with an integrated actuator.
Please use the Selection Guide for combination of ESBE actuators and Controllers to ESBE valves.
For ESBE series CRx use the following instructions:
- Set the valve in midposition according to valve User instruction
- Assembly the controller on the valve according to controller User instruction
- Power up the product first after you are sure about correct assembling
The actuators and controllers are always delivered in midposition from ESBE.
T2 is the "alternative" temperature, T is the "normal" temperature
T2 can be used if you would like to have a different temperature part of the day/night for example a lower indoor temperature during night time
ESBE AB, Bruksgatan 22
SE-333 75 Reftele, Sweden
Tel: +46 371 570 000
E-mail: [email protected]